1.Fast phase changer 

 

Full Automatic Transformation Measuring Apparatus   DIL 805A/D Bach Corporation (Germany)
Uses: Determine the phase transition point of steel heating and cooling process, test the CCT and TTT curves of steel materials, and simulate the hot deformation behavior of steel materials at high temperature. Simulate the transformation process of brazing steel under different heat treatment cooling rates.

 

 

 

 

 

 

2.MTS LandmarkMaterial testing system 

 

MTS ElectroHydraulic Material Mechanics Performance Test System  MTS810(250KN)  Meters Industrial Systems Co., Ltd. (USA)

Uses: Various high precision and high repeatability, fatigue crack growth, high and low cycle fatigue and fracture toughness mode test. Accurately measure various mechanical properties of steel at normal temperature and high temperature.

 

 

 

 

3.scanning electron microscope

The scanning electron microscope (SEM)  SUPRA40  Zeiss (Germany)
Uses: appearance, fracture, and phase observation of various materials. Fracture analysis of various failure parts, composition and type analysis of inclusions, segregation analysis of steel, etc.

 

 

 

 

 

4.Intelligent digital display microscope / stereo microscope 
 

Research LevelMetallurgical Microscope/Stereo Microscope  Leica DMI500M  Leica Corporation (Germany)
Uses: Observe the phase and structure of materials, grains (including possible sub-crystals), non-metallic inclusions and even some crystal defects. For metallographic analysis / stereo microscope can be used for macroscopic fractures and external processes. Surface processing state.

 

 

 

 

5.Dynamic ultra-micro micro hardness tester  

Dynamic UltramicroForce Microhardness SYS.  DUH-211(S)  Shimadzu Corporation (Japan) 
Uses: For the hardness test of the ultra-small force of the sample, or the metal surface and film bonding test. The hardness of the microphase structure can be directly measured.

 

 

 

6.High frequency fatigue testing machine 

HighCold Temperature Fatigue Test System  QBG-200  Changchun Yubang Equipment Co., Ltd. 
Uses: Determination of fatigue properties, fatigue life and crack propagation test of metal, alloy materials and their components under tensile, compressive or tensile and compressive loads at room temperature and high and low temperature.

 

 

 

7.Microcomputer controlled high frequency fatigue testing machine 

HighCold Temperature Fatigue Test System  QBG-100  Changchun Yubang Equipment Co., Ltd. 
Uses: Determination of fatigue properties, fatigue life and crack propagation test of metal, alloy materials and their components under tensile, compressive or tensile stress at room temperature and high and low temperature.

 

 

 

8.Double chamber horizontal vacuum air cooled oil quenching furnace 

 
VacuumOil quenching Heat Treatment Furnace  DGO-322H    Aifa Zhongzhong Vacuum (Shenyang) Co., Ltd.
Uses: Mainly applied vacuum bright quenching of die steel, tool steel, bearing steel, spring steel, stainless steel and titanium alloy, annealing and sintering of magnetic materials, etc. Brazing Solid solution A process such as aging.

 

 

 

9.Single chamber horizontal vacuum high pressure gas quenching furnace  

 

VacuumGas quenching Heat Treatment Furnace  SGF-322H   Aifa Zhongzhong Vacuum (Shenyang) Co., Ltd.

Uses: Mainly applied vacuum high-speed gas cooling bright quenching of die steel, tool steel, bearing steel, spring steel, stainless steel and titanium alloy, annealing and sintering of magnetic materials, etc. Brazing Solid solution A process such as aging.

 

 

 

10.Ion nitriding furnace 

Glow Plasma Nitriding Furnace  LD-30A  Wuhan Ande Heat Treatment Equipment Co., Ltd.
Uses: To form a nitride layer on the surface of metal parts, improve the surface hardness and wear resistance of the material.

 

 

 

11.Vacuum hot pressing furnace  

High-vacuum hot pressing sintering furnace  YYPgr-15-2000  Shanghai Minyue Electric Furnace Technology Co., Ltd.  
Uses: Used in hard alloys, functional ceramics, powder metallurgy, etc. under high temperature and high vacuum conditions, the processing temperature can be as high as 2200 °C.

 

 

 

12.X-ray stress tester  
 

X-Ray stress analyzer   X-350A  Handan City Ester Stress Technology Co., Ltd. (China)  
Uses: Determine the residual stress value and residual austenite content on the surface of the material to evaluate the influence of the processing technology on the surface quality of the workpiece.

 

 

 

13.Impact testing machine

 High-Cold Temperature Impact Test System  JBGDS-300A  Wuzhong Tongli Material Testing Machine Co., Ltd.  
Uses: To determine and evaluate the ability of metal materials to resist impact load damage at room temperature and high and low temperature, and to evaluate the temper brittleness and cold-brittle transition of steel.

 

 

 

 

14.Synchronous thermal analysis system  

 

DSC-TGA Simultaneous Thermal Analysis Test System  STA 409PC luxx  NETZSCH (Germany)
Uses: Detect the simultaneous changes in the thermal effects and masses associated with physical and chemical processes during sample heating and cooling. It can be used to evaluate the transformation rule of carbide precipitation in steel heat treatment process, and to evaluate the temper brittleness of steel.

 

 

 

15.Gear wear tester  

Gear Wear Resistance Test System  MRC-1  Tribology Testing Technology Co., Ltd.  
use:  Test for gear bending fatigue strength and gear contact fatigue strength.

 

 

 

16 .Contact fatigue test system  
 

Contact-fatigue Test System  No model  Jinan Jingcheng Testing Technology Co., Ltd.

Uses: To study the fatigue of friction materials caused by the repeated action of normal load and tangential load.

 

 

 

17 .Vacuum induction melting furnace

 

Vacuum induction melting furnace  ZGJL0.01-40-4 
 
Uses: Used to obtain alloy steel or other metal alloy materials with various compositions by adding different alloying elements under vacuum conditions.

 

 

 

18.Dynamic static thermal expansion  
 

 

Thermal Expansion Test System  DIL 402C  NETZSCH (Germany)  
use:  The thermal expansion effect during heating and cooling of the sample is detected. Can be used to evaluate the phase transition law in steel heat treatment process

 

 

 

19.Rockwell hardness 

 
Rockwell Hardness Tester  HR-150A  Laizhou Huayin Testing Instrument Co., Ltd.  
Uses: Simple and rapid measurement of the hardness of the metal.

 

 

 

20.Micro hardness tester 

Microhardness Tester  HVS-1000  China Shanghai Lunjie Electromechanical Instrument Co., Ltd
 
use:  Measuring the microscopic Vickers or Knoop hardness of tiny, thin specimens and brittle hardware for the analysis of the hardness distribution of the layer after heat treatment of the metal surface.

 

 

 

21.TASMAN full spectrum direct reading spark spectrometer 

TASMAN Full Spectrum Direct Reading Spectrograph  Q4-130
use:  Chemical composition analysis of ferrous and non-ferrous metals.